1.General Description
This hot wire thermo-anemometer is ideal for low air
velocity and volume measurement. The slim plug in
telescopic hot wire probe extends from 0.26 to 1.2m (inc handle) has a probe sensor head 8.5mmØ and is ideal for grille hoods and diffusers. It is excellent for ventilation surveys, air conditioning, clean rooms, flow hoods, air
balancing and environmental monitoring.
2.Accessories
◆User’s manual
◆One type-C cable
| Air velocity | Range | Resolution | Accuracy |
| 0.1～25 m/s | 0.1 | ±(5%+1d) | |
| 0.3～90.0 km/h | 0.1 | ||
| 20～4925 ft/min | 1 | ||
| 0.2～48.5 knots | 0.1 | ||
| 0.2～55.8 MPH | 0.1 | ||
| 130～7500 CMM | 1 | ||
| 157～39370 CFM | 1 | ||
| Area set | 0.1～9999 CM²/0.1～9999㎡/0.1～9999ft² | ||
| Sampling time | 2 time/second | ||
| Air velocity level indication | Digits display | ||
| 3-color LED light alarm | |||
| Audible alarm(can be disabled) | |||
| Alarm for 20 seconds,stop for 1 minute, and then cycle the alarm. (The audible | |||
| Audible alarm | alarm defaults to the ON state and can be turned off by user) | ||
| Overrange indication | When the wind speed exceeds 30m/s, “OL” will be displayed on the screen | ||
| Temperature range | -20℃ ~ 60℃/-4℉~140℉ | ||
| Temperature accuracy | ±1.5℃(±2.7℉) | ||
| Resolution | 0.1 | ||
| Overloading display | Display “LO” below range and “HI” above range | ||
| Humidity Range | 20～100%RH | ||
| Humidity Accuracy | 35～75%RH: ±5%RH， | ||
| Other ranges: ±7%RH | |||
| Humidity Resolution | 1 | ||
| Apparent temperature range | -20℃ ~ 60℃/-4℉~140℉ | ||
| Apparent temperature accuracy | ±1.0℃/1.8℉ | ||
| Apparent temperature resolution | 0.1 | ||
| AVG | Average of the latest 10 readings | ||
| MAX | The maximum value in this measurement | ||
| MIN | The minimum value in this measurement Freeze the current measured reading | ||
| DATA HOLD | -20℃~60℃/-4℉~140℉, | ||
| Operating conditions Storage conditions | < 90%RH(Non condensation) | ||
| -30℃~60℃(-22℉~140℉),< 80%RH | |||
| Auto power off | Meter automatically shuts off after approx. 15 minutes of inactivity | ||
| Power Supply | Built-in lithium battery 1600mAh, USB | ||
| TYPE-C interface power supply (rechargeable) | |||
| Adaptor Output:5.0V 2000mA | |||
| Weight | 355g | ||
| Dimmension | Main unit；225(L)*68(W)*29(H)mm | ||
| Probe diameter: 12/10mm， length: 1.06m | |||
